Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

 

Value Range:Millimeters or Inches
Default Value:Inches
Location:Global

This parameter determines the units that will be used by the scan heads. The Scan Windows and Calibration Fixtures will use the units set here. The data in profiles will either be returned in 1000th of an inch, or micrometer units, depending on this setting.

  

Code Block
themeFadeToGrey
Units Millimeters
ScannerConfig Scanner 0
{
	WindowTop 254
	WindowLeft -127
	WindowBottom 0
	WindowRight 127
	CalibrationFixtureNames	Circles
}

EncoderPulseInterval  0.003937   #how far the belt moves per encoder pulse
EncoderScanInterval   25.4       #the distance between scans

# A CalibFixture named "Circles" -- the name can be anything you want
CalibFixture Circles
{
	CircleFeature 25.4 50.8 76.2 #Radius is 1.0" (25.4 mm) centered at the coordinates (50.8 mm, 76.2 mm)
	CircleFeature 50.8 127.0 152.4 #Radius is 2.0" (50.8 mm) centered at the coordinates (127.0 mm, 152.4 mm)
}