Learn more about our scanners at: https://joescan.com
A calibration fixture is a physical object that you use as a reference point for the scanners' coordinate system. You use these parameters to tell JSDiag the location of the features that make up this object. The available features are CircleFeature
's, SquareFeature
's, and LineFeature
's. A calibration fixture can be made up of many features of only one type, i.e. a lot of CircleFeature
's with no SquareFeature
's or LineFeature
's.
You can put many different CalibFixture
's in a single parameter file. A single ScannerConfig
can have many different CalibFixture
names listed with it'sCalibrationFixtureNames
parameter.
How to Define a Calibration Fixture in the Parameter Editor .
Define calibration fixtures with
CalibFixture
blocks that containCircleFeature
's,SquareFeature
's, orLineFeature
's.Use the
CalibrationFixtureNames
parameter in aScannerConfig
block to tell the scanners which calibration fixtures to use.
CalibFixture
.
Value Format: | CalibFixture YourFixtureNameHere { YourFeaturesHere } |
---|---|
Location: | outside a |
There can be multiple CalibFixture
blocks in a single parameter file, each one with a different name.
Calibration fixtures are declared in the same parameter file as the ScannerConfig
's. All the features must be the same type within a calibration fixture.